COLD FORMING EQUIPMENT FOR COMPLEX FASTENERS PRODUCTION
BOLT FORMER
NUT FORMER
PARTS FORMER
OPEN DIE REHEADER
COMPLEX FASTENERS FORMER
SELF TAPPERS AND SCREWS FORMER
MICRO SCREWS FORMER
HEADING OF LONG PRODUCTS
STUD FORMER
RIVET HEADING
WASHERS PRESS
COLD-HEADING OF HOLLOW PRODUCTS
3-POSITION 6-STROKE MACHINE FOR HEADING FASTENERS OF UNIQUE SHAPES
Technical features of the equipment:
- Puncheon stroke options can be configured independently (from the 1st to the 6th stroke).
- Availability of PKO for each seat of the punch.
- Ejection system of new type.
- Clamping plate of new type.
Equipment Application:
Machines for the production of special fasteners suitable for blanks of simple and complex shapes, make bolts, nuts, complex fasteners:
- Diameter 5 mm - 13 mm.
- length 38 mm - 155 mm.
- Maximum capacity 80 pcs. / min.
In addition, the machines can be applied for deburring and hollow articles.
Technical characteristics of equipment for unique form fasteners cold production
Model | Product Range mm) | Performance (pcs./min.) | Power. PM | Weight Net (kg) | Main Die (mm) | Cutting Die (mm) | Punch (mm) |
---|---|---|---|---|---|---|---|
RG-1315 | M5 × 38 | 60~80 | 5 | 3,800 | Ø38×81 | Ø28×80 | Ø24×40 |
RG-1320 | M6 × 50 | 50~70 | 7.5 | 5,500 | Ø43×97 | Ø36×90 | Ø28×40 |
RG-1325 | M8 × 75 | 35~60 | 10 | 9,000 | Ø58×126 | Ø40×110 | Ø28×40 |
RG-1340 | M13 × 155 | 25~45 | 30 | 18,000 | Ø82×236 | Ø68×190 | Ø48×60 |
2-DIE 4-BLOW MACHINE FOR HEADING SPECIAL FASTENERS
Equipment Features:
- Puncheon stroke options can be configured independently (from the 1st to the 4th stroke).
- Availability of PKO for each seat of the punch.
- Ejection system of new type.
- Clamping plate of new type.
- Diameter: 5 mm - 13 mm.
- length: 38 mm - 155 mm.
- Maximum capacity 80 pcs. / min.
- Protective cover.
- The equipment can be supplied at the request of the Customer in semi-protective housing.
- The equipment is patented.
Technical characteristics of equipment for unique form fasteners cold production
Model | Product Range (mm) | Performance (pcs./min.) | Power. PM |
Weight Net (kg) | Main Die (mm) | Cutting Die (mm) | Punch (mm) |
---|---|---|---|---|---|---|---|
RG-1115 | 5×38 | 60~80 | 3 | 2,500 | Ø38×81 | Ø28×80 | Ø24×40 |
RG-1120 | 6×50 | 50~70 | 5 | 3,700 | Ø43×97 | Ø36×90 | Ø28×40 |
RG-1120L | 6×100 | 40~60 | 5 | 4,500 | Ø43×154 | Ø36×110 | Ø28×40 |
RG-1125 | 8×75 | 40~60 | 7.5 | 6,100 | Ø58×126 | Ø40×110 | Ø38×40 |
RG-1130 | 10×100 | 30~50 | 15 | 9,800 | Ø82×151 | Ø62×130 | Ø38×60 |
RG-1130L | 10×155 | 30~45 | 20 | 13,500 | Ø82×236 | Ø62×130 | Ø38×60 |
RG-1140 | 13×155 | 30~45 | 25 | 14,500 | Ø82×236 | Ø68×190 | Ø48×60 |