OPTICAL SORTING EQUIPMENT WITH 360 DEGREE ROTATION

General Information on Fastener Inspection Equipment EDDY CURRENT SORTING EQUIPMENT CONVEYOR SORTING EQUIPMENT GLASS DIAL SORTING EQUIPMENT ROTARY DISK SORTING EQUIPMENT INSPECTION EQUIPMENT WITH 360° ROTATION PERIPHERAL SORTING EQUIPMENT

EQUIPMENT FOR TESTING FASTENERS AT ANGLES AND WITH 360 DEGREES ROTATION

Using servo motors and magnetic platform to focus the camera. A stepper motor rotates the product under test at different angles and 360 degrees. The data is stored in the computer and can be converted to EXCEL format for further statistical report.

RQA-2500 SERIES

Inspection machines with 360 degree rotation

Suitable products to verify both different categories (size in the range of 100 * 100 mm).
Ideal for flat objects, such as nuts, gaskets, O-rings, etc.
Easy to place, there is no need of alignment.
Automatic control, without setting up the necessary stages.
Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.

Parameters to be checked

The length of the screws	The width of the head	Auto focus	Centre	Outside diameter
Inner diameter	Radius	Radian	The angle of the thread	Concentric and circle

Specifications

Options of fasteners max. size 90 * 90 * 15 mm
Accuracy inspection: ±10 microns
Accuracy at re-inspection: ±5 microns
Inspection time: 60 sec / cycle
Machine weight net / gross: 400/531 kg
Dimensions equipment 1200/700/1580
Dimensions after setting: 1410/895/1850

RQB-1500 SERIES

Suitable for inspection of fasteners and lifting tackle (screws, rivets).
High speed and efficiency of check (10 units / session inspection).
Advanced telecentric lens are equipped with a parallel illumination that helps to avoid visual defects.
Automatic control, without setting up the necessary stages.
Optical and magnetic method is suitable for high-precision positioning.
Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.

Parameters to be checked

The height of the head	The width of the head	The angle of the cylindrical head with a rounded end	The width of the washers	The height of the washers
Radius	The outer diameter of the thread	The inner diameter of the thread	The size of the thread pitch	The angle of the thread
The effective diameter of the thread	Shank diameter	The length of the shank	total length	The angle of the tip

Specifications

Accuracy test: ±10 microns
Accuracy at re-inspection: ±10 microns
Speed test: 15 ~ 150 sec / unit
Machine weight net / gross: 450/620 kg
Dimensions equipment : 1550/750/1680
Dimensions of the machine after the installation: 1740/950/2060

Application area

The height of the head: 3 ~ 12 mm
The diameter of the head: 5 ~ 24 mm
The length of the screws (with head): 10 ~ 135 mm
outer screw diameter: 3 ~ 16 mm

RQC-1500 SERIES

Suitable fasteners for general and special forms of fasteners.
The ability to quickly test at 360 ° rotation of the tested products.
Advanced telecentric lens is equipped with a parallel illumination helps avoid visual defects.
Automatic control, without setting up the necessary stages.
Optical and magnetic method is suitable for high-precision positioning.
Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.

Parameters to be checked

Parallel faces	Parallel angles	The width of the head	The height of the head	The angle of the cylindrical head with a rounded end
Width / Height of washers	The length of the shank	Radius	The outer / inner diameter of the thread	The angle of the tip
The size of the thread pitch	The angle of the thread	The effective diameter of the thread	Shank diameter	total length

Specifications

Accuracy test: ±10 microns
Accuracy at re-inspection: ±5 microns
Inspection speed: 30 ~ 300 sec / unit
Equipment weight net / gross: 300 / 430 kg
Dimensions equipment : 1000 / 720 / 1730
Dimensions of the machine after the installation: 1200 / 920 / 2060

Application area

The height of the head: 3 ~ 12 mm
The diameter of the head: 5 ~ 25 mm
The length of the screws (with the length of the head): 10 ~ 135 mm
outer screw diameter: 3 ~ 18 mm