STEEL WIRE ROPE. CORD. CONTROL CABLE. CONDUCTIVE CABLE
GENERAL INFORMATION
CALIBRATED WIRE
CALIBRATED ROD
SHEET METAL
EPDM BONDED WASHER
STEEL WIRE ROPE
WIRE ROPE SLINGS
STEEL CONVEYOR BELT
STEEL CORD
ROPES FOR STEEL CORD RUBBER BELT
High-strength armoured ropes in protective rubberized cover preventing moisture and dirt ingress are used in conveyor belts, drive belts and engine construction.
| Product | Design | Construction | Diameter, mm | Normative document | Intended use of product |
| Two lay rope for steel cord rubber type ЛК 6×7+IWS |  |
6х7(1+6)+1х7(1+6) +IWS | Steel rope: 2.00-5.40 Wire: 0.20-0.90 |
GB/T12753-2002 | In aviation industry and for conveyor belts. |
| Two lay rope for steel cord rubber type ЛК 6×19+IWS |  |
6x19(1+6+12)+1Х19(1+6+12) +IWS | Steel rope: 4.00-12.00 Wire: 0.20-0.90 |
TU 14-4-701-97 | In aviation industry and for conveyor belts |
| Two lay rope for steel cord rubber type ЛК Warrington 6×W(19)+IWS |  |
6×W(19)+IWS | Steel rope: 5.00-12.00 Wire: 0.20-0.90 |
GB/T12753-2002 | In aviation industry and for conveyor belts. |
| Open two lay rope for steel cord rubber type ЛК |  |
K 6×7+IWS | Steel rope: 2.50-5.90 Wire: 0.20-0.90 |
GB/T12753-2002 | In aviation industry and for conveyor belts. |
| Open two lay rope for steel cord rubber type ЛК |  |
K 6×19+IWS | Steel rope: 4.50-12.00 Wire: 0.20-0.90 |
GB/T12753-2002 | In aviation industry and for conveyor belts. |
| Open two lay rope for steel cord rubber type ЛК |  |
K 6×W(19)+IWS | Steel rope: 5.00-12.00 Wire: 0.20-0.90 |
GB/T12753-2002 | In aviation industry and for conveyor belts. |
STEEL CORDS FOR DRIVE BELTS
| Product | Design | Construction | Diameter, mm | Normative document | Intended use of product |
| Steel cord for drive belts 4×3 |  |
4×3 | 0.40-0.77 | --- | For drive belts of vehicle engines. |
| Steel cord for drive belts 4×19 |  |
4×19 | 2.27-2.87 | --- | For drive belts of vehicle engines. |
| Steel cord for drive belts 7×3 |  |
7×3 | 0.54-1.02 | --- | For drive belts of vehicle engines. |
| Steel cord for drive belts 7×4 |  |
7×4 | 0.64-1.22 | --- | For drive belts of vehicle engines. |
ROPES FOR LIFTING DEVICES
High-quality ropes with fiber core, safe in service.
| Product | Design | Construction | Diameter, mm | Normative document | Intended use of product |
| Two lay steel ropes type ЛК-О Сил 6×S (19)+FC |
 |
6хS19(1+9+9)+FC | 6-16 | GOST 3077–80 EN 12385 |
For elevators, lift and transport facilities, monorails. |
| Two lay steel ropes type ЛК-О Сил 8×S (19)+FC |
 |
8хS19(1+9+9)+FC | 8-16 | ＪＩＳ Ｇ ３５２５ | For elevators, lift and transport facilities, monorails. |
SMALL DIAMETER ROPES FOR SPECIAL PURPOSES
In addition to general applications ropes are widely used in medical equipment (gastroscopy, colonoscopy, broaches), wristwatches, decorative ornaments.
| Product | Design | Construction | Diameter, mm | Normative document | Intended use of product |
| One lay zinked steel ropes type ЛК-О |
 |
1х7 (1+6) | 0.15-1.20 | TU 14–173–46–2006 TU 14–173–132–2003 |
In medical equipment, wristwatches, decorative ornaments. |
| One lay zinked steel ropes type ТК |  |
1х19 (1+6+12) | 0.40-2.00 | GOST 3063-80 DIN 3053 |
In medical equipment, wristwatches, decorative ornaments. |
| One lay zinked steel ropes type ЛК |  |
7х7 | 0.30-2.50 | GOST 3066-80 DIN 3055 |
In medical equipment, wristwatches, decorative ornaments. |
| Zinked steel ropes 7х19 |  |
7х19 | 0.80-6.00 | GOST 3067
DIN 3060 |
In medical equipment, wristwatches, decorative ornaments. |
